SM
您现在的位置: 首页 > 产品介绍 > SM
  • SM

    sm-smu.jpg
    SM SM 3d
    SM 泵是一款工业用三螺杆泵,适合低中压(80 巴)下使用。SM 泵是一款可靠的低噪音设备,适用于要求使用寿命长且成本低的应用领域,如家用电梯和升降机。SM 泵是一款装配于泵体内的灌液泵。泵体内有三个螺杆旋转,螺杆的设计可避免产生任何轴向荷载。功能压力在主螺杆的平衡活塞与周围泵体之间形成容差。这会在螺杆上创造平衡流体动力,同时润滑和冷却密封组件。抽出的流体以液压方式传输移动侧面螺杆所需的扭矩。这意味着螺杆旋转过程中不会发生磨损。通过采用高质量的螺杆制造工艺,确保其噪音和脉动极小。按照几何设计,三个螺杆间形成了密封腔。在螺杆旋转过程中,主螺杆形成某种类型的空腔,它容纳水流并将水流按轴向从入口排出至出口端口。发动机有潜水式与干式之分。潜水式发动机是直接连接至泵、或者用法兰和联轴器连接至泵的三相交流异步发动机。壳体防护等级为 IP 00,结构形式为 B15,绝缘等级为 F 级。油温不得超过 70℃。

    Types Semi submersed - submersed
    Available models 20 - 25 - 32 - 40 - 45 - 55 - 60 - 70 - 80
    Connections NPT
    Shaft rotation Clockwise (from shaft end) for counter clockwise please contact Settima
    Pump body Aluminium
    Main screw Steel
    Idler screws Cast Iron
    Filtration Suction filter: from 250 µm
    Flow / Portate Flow capacity from 8 to 1.200 L/min (3.300 rpm at 60Hz)
    Operating pressure 80 bar max
    Temperature Up to 100° C
    Viscosity From 10 up to 2.000 cSt
    Speed From 500* up to 3600 rpm
    Rotation Clockwise
    Acoustic emissions From 58 to 77 dB (A)
    *For lower speed please contact Settima.
  • 产品应用

    电梯


    产品优势

    流动性高


    无噪音


    下载

    没有可用的内容
    Please insert your email address to download pdf.

The materials on this website are, in whole or in part, protected and are proprietary of Settima Meccanica S.r.l. based in via E. Berlinguer 20, 29020 Settima (PC) including, as non-exhaustive examples, the brand names, trademarks, domain names, designs and patterns, patents and copyrights,. All rights therein are internationally reserved.

All brand names, trade names, logos, designs and other distinctive marks reproduced in this website, even if not registered, are trademarks of Settima Meccanica S.r.l. All domain names used in this website and / or in the websites connected to this one, belong to, or are authorized by, Settima Meccanica, which owns their whole management at international level.