SFO
You are here: Home > Products > SFO
  • SFO

    FUEL OIL HANDLING PUMP (MARINE – POWER GENERATION)LUBRICATION – CIRCULATION – TRANSFER

    sfo.jpg
    SFO SFO 3d
    In the SFO pumps the fluid has a uniform axial flow, which leads to a minimum of fluid pulsation and an extremely quiet operation. SFO pump has been designed for handling non-aggressive fluids with sufficient lubricating properties.

    The SFO series products are the ideal pumps for Lubrication, Circulation and Transfer.


    Models / Modelli 25 - 32 - 40
    Drive loading / Carichi No axial or radial loads / Nessun carico assiale o trasversale
    Shaft rotation / Rotazione albero Clockwise (from shaft end) / Destra
    Shaft speed Velocità di rotazione From 500 to 3.600 rpm* / Da 500 a 3.600 rpm*
    Flows / Portate From 12 up to 75 L/min (at 1.450 rpm) / Da 12 a 75 L/min (a 1.450 rpm)
    Outlet pressure Pressione di mandata 20 bar continous - 40 bar intermittent 20 bar continuo - 40 bar ad intermittenza
    Inlet pressure Pressione di aspirazione Min. -0.7 bar max. 1.5 bar (for higer pressure please contact Settima) Min. -0.7 bar max. 1.5 bar (per pressioni maggiori contattare Settima)
    Fluids / Fluidi Mineral oil, synthetic oil, oil water emulsions, fuels, marine distillate fuels, marine residual fuels
    Viscosity / Viscosità **Down to 2 cSt / **Minimo 2 cSt
    Seals Guarnizioni Lip seal: NBR, Viton, EPDM (others on request) Mechanical seal Lip seal + Mechanical seal Guarn. a labbro: NBR, Viton, EPDM (altro su richiesta) Tenuta meccanica Guarnizione a labbro + Tenuta meccanica
    Acoustic emissions Emissioni acustiche From 50 up to 58 db(A) at 2.950 rpm / Da 50 fino a 58 db(A) a 2.950 rpm
    Pump body / Corpo Cast iron GJL-250 EN 1561 / Ghisa GJL-250 EN 1561
    Screw / Viti Steel (central steel, lateral cast iron on request) / Acciaio (acciaio vite centrale, ghisa viti secondarie su richiesta)
    Enviroment temperature Temperatura ambiente From -20°C up to +50°C / Da -20°C a +50°C
    Hydraulic temperature Temperature olio From -20°C up to +155°C / Da -20°C a +155°C
    Filtration / Filtrazione Permitted 70 μm, (in case of low viscosity 20 μm) / Permesso 70 μm, (in caso di bassa viscosità 20 μm)
    *Depending of viscosity.
    In base alla viscosità
    **For lower viscosity (according to ISO 8217 fuel standard) please contact Settima.
    Per viscosità minori (ISO 8217) contattare Settima
  • Applications

    Industrial


    Marine


    Capabilities

    No Noise


    Low Viscosity


    Fuel Oils


    Dirty Fluids


    Download

    Brochure

    »SFO
    Please insert your email address to download pdf.

The materials on this website are, in whole or in part, protected and are proprietary of Settima Meccanica S.r.l. based in via E. Berlinguer 20, 29020 Settima (PC) including, as non-exhaustive examples, the brand names, trademarks, domain names, designs and patterns, patents and copyrights,. All rights therein are internationally reserved.

All brand names, trade names, logos, designs and other distinctive marks reproduced in this website, even if not registered, are trademarks of Settima Meccanica S.r.l. All domain names used in this website and / or in the websites connected to this one, belong to, or are authorized by, Settima Meccanica, which owns their whole management at international level.