SMAT 16B
ナビゲーション: ホーム > 製品情報 > SMAT 16B
  • SMAT 16B

    アメリカ式度量衡のアプリケーション向けに設計された
    中低圧の無騒音装置向けの最適なスクリューポンプ

    smat-16b-20big.jpg
    SMAT 16B SMAT 16B 3d
    SMAT16Bシリーズは中低圧 (40 bar)に対応する工業用三軸スクリューポンプであり,長寿名及び低コストを必要とする作業環境に最適な低騒音の信頼性のあるポンプです.SMAT16Bポンプはもっとも基本的なポンプの一つであり,回転部の3本のねじはどんな軸方向に作用する荷重も避けることができるように設計されています.運転中にかかる圧力は流体学的な力を分散させる同時にシーリング部分の潤滑・冷却作用を促進します.普段ならスクリューの側面に伝わるトルクは吸い上げられた流体にそのまま伝わります.これは回転部のねじが摩耗されることなく回転できることを意味します.

    高品質のねじは騒音と振動の発生を大幅に抑制できます.

    3本のねじの幾何学的な設計はポンプの内部に密閉された空間を作っています.また,ねじが回転するとき,主ねじ(駆動ねじ)は流体を収容しておいて吸込口から吐出口の方向へ流す空間を作っています.SMTポンプは内部または外部に逃がし安全弁の取り付けも可能です.SMT16BポンプはSMTポンプと比べ,より短いねじを付けているため,限れたスペースでの使用も可能です.


    Types Tipi Dry (SMT16B) or submerged (SMIT16B) Esterno (SMT16B) o sommerso (SMIT16B)
    Models Modelli 20 - 25 - 32 - 40 - 45 - 55 - 60 - 70 - 80 - 90 - 110 - 125 - 150 - 180
    Installation Installazione Free for SMT16B. Submerged (totally or partially) for SMIT16B Qualsiasi per SMT16B. Sommersa (parzialmente o completamente) per SMIT16B
    Flanges Flange ISO 3019/2
    Connections Connessioni SAE 3000 - BSPP
    Drive loading Carichi No axial or radial loads Nessun carico assiale o trasversale
    Shaft rotation Rotazione albero Clockwise (from shaft end) , (suitable also for counter clockwise rotation) Destra (disponibile anche per rotazione sinistra)
    Flows Portate From 4 up to 3.200 L/min Da 4 a 3.200 L/min
    Outlet Pressure Pressione di mandata Up to 40 bar Fino a 40 bar
    Inlet Pressure Pressione in aspirazione Min. -0.7 bar max. 3 bar(2) Min. -0.7 bar max. 3 bar(2)
    Viscosity Viscosità From 2 up to 10.000 cSt(4) Da 2 fino a 10.000 cSt(4)
    Seals polymer (shaft, O-ring) Polimero guarnizioni (albero, anello di tenuta) NBR, FKM, EPDM (5)
    Seal type Tipo di guarnizioni TM, TMK, TMZ, FGM
    Acoustic Emissions Emissioni Acustiche From 52 up to 68 db(A) at 2.950 rpm value based on ISO 4412 test procedure Da 52 fino a 68 db(A) a 2.950 rpm (ISO 4412 test)
    Pump body (special applications) Corpo pompa (applicazioni speciali) Cast iron, steel. Hardened steel and stainless steel available on request Ghisa, acciaio. Acciaio temprato e acciaio inox su richiesta.
    Screws Viti Steel for main screw , idler cast iron Acciaio vite principale, ghisa viti secondarie
    Screws (special applications) Viti (applicazioni speciali) Core hardened steel screws, surface treated screws Viti in acciaio temprato, viti trattate superficialmente
    Models Modelli 125 - 150 - 180
    Installation Installazione Foot mounted Con piedi
    Suction & pressure ports Flange mandata e aspirazione ANSI / DIN
    Shaft speed Velocità di rotazione From 300 to 1.800 rpm (1) Da 300 a 1.800 rpm (1)
    Flows Portate From 1.700 L / min up to 4.900 L / min Da 1.700 L / min a 4.900 L / min
    Fluids(3) Fluidi(3) • Mineral oil HLP e HLVP
    • Ecologic fluids HETG, HEPG, HEE
    • Synthetic fluid or emulsion: HFA oil-water emulsion, HFB water-oil emulsion 40% of volume, HFC water/ glycole – water max 35 to 55%, HFDR phosphate ester
    • Lubrication high viscosity oils
    • Special synthetic fluid: MIL-H, SKYDROL,
    • Fuel oil: MGO, MDO, Low sulfur MDO and HFO
    • DMX (ISO8217), DMA, DMB, DMC, DMZ
    • Bunker oil, furnace oil, engines oil, heating oil, hydraulics oils DIN 51524
    • Oli minerali HLP e HLVP
    • Fluidi ecologici HETG, HEPG, HEE
    • Fluidi sintetici o emulsioni: HFA emulsione olio-acqua, HFB emulsione acqua-olio 40% dl volume, HFC acqua/glicole – acqua max 35 to 55%, HFDR phosphate ester
    • Olio ad alta viscosità per lubrificazione
    • Fluidi speciali sintetici: MIL-H, SKYDROL
    • Fuel oil: MGO, MDO, Basso livello di zolfo MDO e HFO
    • DMX (ISO8217), DMA, DMB, DMC, DMZ
    • Bunker oil, furnace oil, olio per motori, heating oil, olio idraulico DIN 51524
    Pump Body Corpo Pompa Aluminum alloy Alluminio
    Pump Body (special applications) Corpo Pompa (applicazioni speciali) Cast iron, steel and stainless steel available on request Ghisa, acciaio e acciaio inox su richiesta
    Screw Viti Steel for main screw , idler cast iron Acciaio vite principale, ghisa viti secondarie
    Screws (special applications) Viti (applicazioni speciali) Core hardened steel screws, surface treated screws Viti in acciaio temprato, viti trattate superficialmente
    Environment Temperature Temperatura Ambiente From - 50 ° up to + 100°C (6) Da - 50 ° a + 100°C (6)
    Hydraulic Temperature Temperatura Olio From - 50° C up to + 300° C (6) Da - 50° C a + 300° C (6)
    Filtration Filtrazione Permissible degree of fluid contamination NAS to 1638 class 10 or ISO DIS 4406 – 19/16. Recommended filtration ß 25 ≥ 75 Contaminazione NAS tipo 1638 classe 10 o ISO DIS 4406 – 19/16 . Filtrazione raccomandata ß 25 ≥ 75
    (1)For shaft speed lower than 1.000 rpm and over 1.800 rpm please contact Settima.
    Per velocità inferiori a 1.000 rpm e maggiori di 1.800 rpm contattare Settima. (2)For higher pressure please contact Settima.
    Per pressioni maggiori contattare Settima. (3)For request of different fluids please contact Settima.
    Per l’utilizzo di diversi fluidi contattare Settima.
  • アプリケーション

    工業


    造船・海洋


    フィルター


    潤滑


    プレス機器


    冷却装置


    風力タービン


    機能

    高流量


    無騒音


    不純物を含む液体


    低粘度液


    化石燃料


    高粘度液


    Download

    no content available
    Please insert your email address to download pdf.

The materials on this website are, in whole or in part, protected and are proprietary of Settima Meccanica S.r.l. based in via E. Berlinguer 20, 29020 Settima (PC) including, as non-exhaustive examples, the brand names, trademarks, domain names, designs and patterns, patents and copyrights,. All rights therein are internationally reserved.

All brand names, trade names, logos, designs and other distinctive marks reproduced in this website, even if not registered, are trademarks of Settima Meccanica S.r.l. All domain names used in this website and / or in the websites connected to this one, belong to, or are authorized by, Settima Meccanica, which owns their whole management at international level.